Powder Coating Tips and Tricks in Washington

You’ve probably seen the kind of quality, aesthetic appeal and durability that powder coating delivers. Powder coating is used in a wide variety of applications for products and components across industries. Everything from toys to automotive parts can be treated with powder coating, and this service is becoming increasingly popular. However, not all powder coating work yields the same results. To ensure that your powder coating project turns out as successfully as possible, it’s important to follow this powder coating guide in Washington:

  • Use the right equipment: To get a powder coating job that you’re happy with, you need to start with the right powder coating equipment. Use an effective powder coating sprayer, and make sure you have a good surface to work with. You will also need an electric oven to cure your powder coated component. Choose high-quality powder pigment that offers vibrant color and a desirable finish that you will be happy with. You should also choose the right nozzles and accessories for your particular powder coating needs.
  • Prep your surface: You need to prep your component before applying a powder coat to the surface. Make sure that the item has been thoroughly cleaned to ensure the best adhesion possible. Acetone is typically used to prep the surface of an item before it is coated, although some people opt for mineral spirits instead.
  • Test your color and technique: Before you apply powder coating to the entirety of your item, you should test it out first on a sample piece. Doing a trial run allows you to ensure that you are using the right application technique and that the color and finish matches what you’re expecting.
  • Be prepared to touch up imperfections: After the powder is applied, you have a limited amount of time to fix issues before it cures. Monitor your application carefully and be prepared to make improvements or fix imperfections to ensure the best final outcome possible. You should also monitor your work to determine whether a second coat is necessary to achieve the result you’re looking for.
  • Consider temperature: A lot of people choose to powder coat components when they’re still hot, but this can result in some less-than-favorable outcomes. When you apply powder coating to a hot component, the coating can melt on contact, which often causes people to apply too much powder coating. When this happens, you’re more likely to have problems with discoloration or uneven texture. With this in mind, you should only spray components at room temperature, especially if you don’t have a lot of experience with powder coating.

At Powder Vision Inc., we know how important it is to use the right equipment and techniques to achieve a powder coat that you’re happy with. If you’re looking for quality powder coating services without the hassle of doing the job yourself, our team is here to help. We are dedicated to delivering the best powder coating services possible, regardless of the particular product or application. Reach out to us today to learn more powder coating tips and tricks in Washington!